B&B Sheet Metal’s Series S2000 is the most popular panel system with 1¾” integral snap-lock system defining architectural versatility, clean details, and continuous seam transitions from roof to mansard, fascia, wall panel, or soffit.

The Series S2000 panel system serves the structural needs of roofing/fascia, mansard, soffit and siding systems with the dramatically increased spanning and uplift capabilities. The Series S2000 profile is designed for roofs and other exterior surfaces of medium commercial and residential projects with a minimum pitch 3:12 and will require seam sealant if air and water tests are specified. The roof panel system is also available with a snap-on architectural batten.

S2000 profile



All flashings and trim are available to be manufacturer by B&B Sheet Metal to match with panel selection. B&B Sheet Metal’s capabilities include press-breaking, notching, shearing, welding and much more. Shop drawings of flashing details are available upon request. B&B Sheet Metal can provide assistance to typical flashing standards and conditions. For more information of details of flashings and trim contact us directly or visit


Series 2000 panel system may be specified for application over solid deck, 1/2” plywood or 22 gauge metal deck with 2 layers of 15# felt or 1 layer of 30# felt, minimum pitch: 3:12 (specify as required). The Series S2000 may be specified for applications over solid deck or over purlins or over metal decking with rigid insulation. The Series S2000 panel system can also be secured with bearing plates and clips through the insulation to the metal deck. Fixed S2000 panel clips are installed over the male leg and fastened to the substrate involving the panels to be “snap-locked” together. Next, simply push the female leg of the panel onto the male/clip assembly and lock the panels together. If you wish a batten appearance, apply sealant at the panel interlock (specify “with battens”).
Finish & Color Availability


  • .032 and .040 Kynar Aluminum
  • 24ga and 22ga Kynar Steel
  • Galvalume Plus
  • 16oz and 20oz Copper
  • .032 and .040 Mill Finish Aluminum
  • 26ga, 24ga and 22ga Galvanized
Finish & Color Availability


  • Structural
  • Architectural detail capability
  • Tight radius curving capacity
  • Shallow slope (less than 3:12)
  • Narrow seam
  • Wide seam
  • Flush seam
  • Snap-lock seam
  • Mechanical seam
  • Good transition for mansard or fascia
  • UL-90 Tested
  • Florida Building Code Compliant
  • ASTM water & air infiltration tested
  • Dade County Tested
  • ASTM E-84 Tested
  • ASTM E-1592 Tested
  • Weathertightness warranties
  • FM Tested

Related Project


, , ,

BEACH ROAD HEADQUARTERS Project Description Project Name: BEACH ROAD HEADQUARTERSLocation: Great Neck, NYDate Completed: To Be Announced Project Component Type: S2000 STANDING SEAM PANELMaterial: .032 dove grey alum. See [...]

Lumber Earth Reality

, , ,

Lumber Earth Reality Project Description Project Name: Lumber Earth RealityLocation: Roslyn, NYDate Completed: To Be Announced Project Component Type: S2000 STANDING SEAM PANELMaterial: .032 champagne metallic See More Details [...]


, , , , ,

175 ROSLYN RD Project Description Project Name: 175 ROSLYN ROADLocation: ROSLYN HEIGHT, NYDate Completed: To Be Announced Project Component Type: S2000, Flush wall panelMaterial: .032 COPPER PENNY ALUM. See [...]

BBSeetmetal- New York City- Thuway Shopping Center- Architectural Paneling System- Drainage System- -

Thruway Shopping Center

, , , ,

THRUWAY SHOPPING CENTER Project Description Project Name: THRUWAY SHOPPING CENTERLocation: Greenwich, CTDate Completed: To Be Announced Project Component Type: S2000 SERIES STANDING SEAM PANELMaterial: .032 Slate Gray Kynar Alum. [...]