2 Piece Counter Flashings

2 Piece Counter Flashings are designed to allow for installation of each piece at different stages.

Installing 2 piece flashings can be simple when instructions are followed. When the wall is being built the mason usually installs the reciever section first. This allows for the insert to be installed by others when the base flashing of the roof is in place and ready; thus eliminating any mangling of the material that would take place in a brand new one piece system. Keep in mind, we can also pre-fabricate all your miters to allow for a smoother installation.

2 Piece Counter Flashing Style A2 Piece Counter Flashing Style A profile

2 Piece Counter Flashings Style A are the most commonly used flashing. This piece maintains 4 inch top measurements with a 1 inch return on the back.

A 2 Piece Counter Flashing Style A, is designed to sit on a course of bricks, with a return in the break stops water penetration. Additionally, the 1/2 inch bend found in the front of the piece, runs water away from the wall.

2 Piece Counter Flashing Style B2 Piece Counter Flashing Style B profile

2 Piece Counter Flashing Style B runs across a row of bricks, and goes up, and then runs across another brick.

A 2 Piece Counter Flashing Style B is a great way to run water and maintain structural integrity and the efficacy of the overall system.

2 Piece Counter Flashing Style C2 Piece Counter Flashing Style C profile

2 Piece Counter Flashing Style C runs across 2 courses of brick with a return bend sticking out. It also contains a drip edge to channel water away.

The C Style runs across 2 rows of masonry, then returns with a bend-kick terminating at a drip-edge.

2 Piece Counter Flashing Style D2 Piece Counter Flashing Style D profile

2 Piece Counter Flashing Style D has no return in the back. It is suited to fit across one course of bricks.

The portion of the flashing attached to a vertical surface to prevent water migration from occurring behind the base flashing.

2 Piece Counter Flashing Style E2 Piece Counter Flashing Style E profile

2 Piece Counter Flashing Style E runs across with a drip going down instead of up.

This labor horse works to protect the upper edge of the base flashing. How noble!

Finish & Color

MATERIALS

  • Can be fabricated in different materials, please contact B&B Sheet Metal
Finish & Color