Forgot Password?

New Client? Register Now!



	Balcony Covers & Dividers

	Chimney Caps

	Chimney Pots

	Copper Bay Windows

	Copper Coils

	Cornices

	Cross Finials

	Cupolas

	Downspout Elbows

	Equipment Supports

	Finials and Spires

	Flange Tubes

	Flashings

	Flat Metal Sheets

	Flat Roof Ventilators

	Full Louver Dormers

	Gutter Rain Chains

	Gutters

	Leader Heads or Conductor Heads

	Leaders or Downspouts

	Metal Awnings & Canopies

	Metal Roof Panels

	Metal Wall Panels

	Pitch Pockets

	Planters & Shutters

	Post Cap Finials

	Radiator Covers

	Register Air Grilles

	Ridge Caps or Hip Caps

	Roof Hatches

	SALE ITEMS

	Scrap Metal Fabrication

Scuppers or Eave Boxes

Skylights

Smokestacks

Snow Guards

Steeples

Tools

Wall Louver Vents

Window or Door Pediments

Flange Tubes

Flange Fittings

Flange Tubes are soldered pieces primarily used for draining purposes.

Flange tubes can also be used with a sloped-flange to cover a vent-stack on a sloped roof.

B&B's industry-leading team will walk you through your next project, selecting the best choice items, customized to your needs and budgetary considerations.

The common sizes of these drainage tubes are actually smaller than the measurement of the tube that is required. For example, if you require a 4" tube, we would manufacture a 3.5" tube when it is being placed on the inside of a drain pipe. If it is going over the outside of a wastepipe it is usually turned upside down and made 3/4" bigger. In this case the tube would actually be 4.75".

B&B Sheet Metal creates custom made flange tubes that are up to 3 feet long and can be customized to almost any diameter.

Select a Product for Fabrication

Drop Flange Metal Tube Drop Flange Tubes are soldered to provide a watertight seal. They are a cost effective way of draining. By using a superior material (such as copper) if provides durability and very little maintenance(if any).

Flat Flange Metal Tube Flat Roof Flange Tubes are used to effectively seal the penetration pipes that extend through the flat roof.

Sloped Roof Metal Flange Tube Slope Roof Flange Tubes are typically made on a 6/12 or 10/12 pitch, but can be custom made for virtually any roof angle. They are made with caps for easy installation. The length of the tubes are typically 18 inches at the longest point. These are a beautiful way to wrap the waste pipes to provide a water tight seal on a sloped roof.

watertight levy leave dry osmose down the tubes filter off flow out leak let water release abate effuse run off taper off trickle well gutter drain,sloped roof draining gutter outflow flanged pipes

About SSL Certificates